Tannoy C902 Cell Phone User Manual


 
7Getting started
Turning on the phone
To turn on the phone
1 Press and hold down .
2 Enter your SIM card PIN, if requested
and select OK.
3 Select a language.
4 Select Cont. to use the setup wizard
while settings are downloaded.
SIM card
The SIM (Subscriber Identity Module)
card, which you get from your network
operator, contains information about
your subscription.
Always turn off your phone and detach
the charger before you insert or remove
the SIM card.
PIN
You may need a PIN (Personal
Identification Number) to activate
the services in your phone. Your PIN
is supplied by your network operator.
Each PIN digit appears as *, unless it
starts with emergency number digits,
for example, 112 or 911. You can see
and call an emergency number
without entering a PIN.
Startup screen
The startup screen appears when you
turn your phone on. See Using pictures
on page 23.
Standby
After you have turned your phone on
and entered your PIN, the name of the
network operator appears. This view
is called standby.
If you want to correct a mistake when
you enter your PIN, press .
Before turning the phone off, you must
return to standby.
You can save contacts on the SIM card
before you remove it from your phone.
See To copy names and numbers to the
SIM card on page 27.
If you enter the wrong PIN three times
in a row, the SIM card is blocked. See SIM
card lock on page 61.
This is the Internet version of the User's guide. © Print only for private use.