Filter
Top Products
Ver. 1.5
4/21/2009 - 2 -
Figure 3
8. Click on the Over The Air Activation button.
9. If Network Stability is OK For Activation (if Not Ok for Activation, wait 3
minutes.) If Not OK for Activation for 15 additional minutes, contact Support.
10. Click the Activate button.
11. Wait 3 minutes, then check status. If still in progress, wait an additional 3
minutes. If still in progress or ‘failed’, contact support.
12. When ‘Activated’ click Back button
13. Click the Home button.
14. Go to Interfaces-Wireless and
Wireless Connection: and
Select ‘Enable’ (refer to
figure 11)
Figure 4
15. At the bottom of the page, click the Update button.
16. Click on the Home button.
17. Click on the Restart button and confirm by clicking the Restart button again, and
wait 30 seconds.
18. Click on the Home button.