ZTE Z768G Cell Phone User Manual


 
46 47
FCC Compliance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly
approved by the manufacturer could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Using Your Phone With a
Hearing Aid Device
Your Z768G is compliant with the FCC Hearing Aid
Compatibility (HAC) requirements. For additional HAC
information, including the HAC rating of this product,
please refer to www.zteusa.com/support_page/.
When some wireless phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate. The
wireless telephone industry has developed ratings for
some of their mobile phones to assist hearing device
users in finding phones that may be compatible with
their hearing devices. Not all phones have been rated.
Phones that have been rated have a label on the box.
Your Z768G has been tested for hearing aid
device compatibility and has an M3/T3 rating.
These ratings are not guaranteed. Results will vary,
depending on the level of immunity of your hearing
device and the degree of your hearing loss. If your
hearing device happens to be vulnerable to interference,
you may not be able to use a rated phone successfully.
For Your Safety
Trying out the phone with your hearing device is the
best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
with hearing devices than phones that are not labeled.
M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
contain telecoils.) The more immune your hearing
aid device is, the less likely you are to experience
interference noise from your wireless phone.
Hearing devices may also be measured for immunity
to this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device.
For additional information about the FCC’s actions with
regard to hearing aid compatible wireless devices and
other steps the FCC has taken to ensure that individuals
with disabilities have access to telecommunications
services, please go to www.fcc.gov/cgb/dro.
Turning on the HAC Setting
To turn on the HAC function, press the Home Key >
Menu Key > Settings > Call settings and check the
Hearing aids check box. For detailed information, refer
to “Using Your Phone With a Hearing Aid Device.”
This section applies to T-Rating only and hearing aids
that contain telecoils. When the HAC setting is on,
your Z768G sends the audio from your phone calls
to the telecoil rather than to the microphone of your
hearing aid. You are likely to hear calls much better
because volume is increased and background noise and
feedback are diminished. The HAC setting improves
only the calls you listen to through the earpiece. It does
not affect calls heard on the speaker or with a headset.
HAC requires extra battery power, so watch your battery
consumption when it’s turned on.
CAUTION: Do not turn on the HAC setting unless
you use a hearing aid with a telecoil. Using this setting
without a hearing aid or with a hearing aid without a
telecoil may be harmful to your hearing.
Distraction
Driving
Full attention must be given to driving at all times in
order to reduce the risk of an accident. Using a phone
while driving (even with a hands free kit) can cause
distraction and lead to an accident. You must comply
with local laws and regulations restricting the use of
wireless devices while driving.
Operating Machinery
Full attention must be given to operating the machinery
in order to reduce the risk of an accident.
For Your Safety