ZTE Z930L Cell Phone User Manual


 
14
Phone Calls
15
NOTE: To silence the ringer before answering the call,
press the Volume Up/Down Keys.
Rejecting a Call
Drag to the center to reject the call.
You can also drag
to the center to reject the call
and send a preset text message to the caller.
TIP: To edit the text response from within the Phone
app, press the Menu Key > Settings > Quick
responses.
Muting a Call
During a call, you can mute your microphone so that the
person you are speaking to cannot hear you, but you
can still hear them.
Tap Mute to turn your microphone off. To turn your
microphone back on, tap Mute again.
Putting a Call on Hold
During a call, you can put it on hold by tapping Hold on
the screen. Tap Hold to return to the call.
Switching Between Current Calls
When you’re on a call, your phone screen informs you
that another call is coming in and displays the caller ID.
To respond to an incoming call while you’re on
a call:
Drag
to the center to answer the call. (This puts the
first caller on hold and answers the second call).
To switch between two calls:
Tap Swap at the bottom of the screen.
Turning the Speakerphone On/O
Tap Speaker during a call to turn the speakerphone on.
Tap Speaker again to turn off the speakerphone.
Ending a Call
Tap to finish a call.
Adjusting Your Call Settings
Using Fixed Dialing Numbers
Fixed Dialing Numbers (FDN) allows you to restrict
outgoing calls to a limited set of phone numbers.
1.
In the Phone app, press the Menu Key > Settings >
Fixed Dialing Numbers.
2. The following options are available:
• Enable FDN: Input the PIN2 code to enable the
FDN feature.
• Change PIN2: Change the PIN2 code for FDN
access.
• FDN list: Manage the FDN list.
NOTE: The PIN2 code is provided by your carrier.
Entering an incorrect PIN2 code more times than
allowed can lock your SIM card. Contact the service
provider for assistance.
Editing Quick Response to
Rejected Callers
1. Press the HomeKey > .
2.
Press the Menu Key > Settings > Quick responses.
3. Tap the text message to edit it.
4. Tap OK.
Setting Up Voicemail
1. Press the HomeKey > .
2. Press the Menu Key > Settings > Voicemail.
3. Tap Service to select voicemail service provider.
Your carrier is the default.
4. Tap Setup > Voicemail number to edit the
voicemail number if necessary.
Setting Up TTY Mode
Select a TTY mode for your phone to work with a
teletypewriter or turn TTY off.
1. Press the HomeKey >
.
2. Press the Menu Key > Settings > TTY mode.
3. Tap TTY Off to turn the feature off, or tap TTY Full,
TTYHCO, or TTY VCO to select a mode for your
phone to work with the teletypewriter. Consult your
teletypewriter manufacturer’s manual if necessary.
Setting Hearing Aids
You can select to turn on hearing aid compatibility, or
turn hearing aids off.
1. Press the HomeKey >
.
2. Press the Menu Key > Settings.
3. Tap Hearingaidsto turn hearing aids on or off.
Setting DTMF Tones
You can set the length of Dual-tone multi-frequency
(DTMF) signal tones.
1. Press the HomeKey >
.
2. Press the Menu Key > Settings > DTMF tones.
3. Tap Normal or Long.
Barring Certain Calls
Call barring feature allows you to forbid certain types of
calls from your phone.
1. Press the HomeKey >
.
2. Press the Menu Key > Settings > Call Barring
Settings.
3. Set the restriction of specific types of calls from
your phone.
Forwarding Incoming Calls
Call forwarding feature allows you to forward your
incoming calls to another phone number.
1. Press the HomeKey >
.
2. Press the Menu Key > Settings > Call
forwarding.
3. Tap an available option (Always forward,
Forward when busy, Forward when
unanswered, Forward when unreachable)
to enable it.
Phone Calls