A SERVICE OF

logo

78 M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
Figure 54
Software Execution Messages
After the software download, the port starts to execute the software
from the flash memory. The port runs a selftest, and the messages shown
in Figure 55
appear:
Figure 55
Port Self-test Message
Then the
Login
prompt appears; refer to page 52 for more information.
If, instead of the messages in Figure 55
through Figure 55, one of the
following messages appear, the software load failed:
Flash Error
SW image validation failed
Try to load the software again. If the problem persists, replace the port in
the VCN AC.
Start executing main!
Watchdog initialized OK !
Ethernet MAC address is 00.c0.da.40.80.54
HDLC selftest passed!
Ethernet selftest passed!
I2C selftest passed!
SMC2 task created!
SMC2 task started!
SMC2 task created!
SMC2 task started!
SMC2 selftest passed!
VDSL selftest passed!
MNG task created!
MNG task started!
AGENT task created!
IP task created!
IP task started!
LED task created!
LED task started!
LMA task created
LMA task started
Telnet CLI task created