96 M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
The messages in Figure 76 appear.
Figure 76
Restart Messages
This is followed by the messages in Figure 54 and Figure 55, and the
Login
prompt.
VDSL Restart
To restart VDSL in the Port
Control Menu
(Figure 74
), type
3
and press
<Enter>. The following message appears:
Do you want to proceed (Y / [N] ) ?;
To proceed, type
y
and press <Enter>; the following confirmation
message appears:
The action has been done
To abort type
n
and press <Enter>.
Reset all Counters
To reset all traffic counters in the Port
Control Menu
(Figure 74
), type
4
.
The following message appears:
Do you want to proceed (Y / [N] ) ?;
To proceed type
y
and press <Enter>; the following confirmation
message appears:
The action has been done
To abort type
n
and press <Enter>.
******************************
SW is being executed from Flash Please wait...
******************************
SW image is being copied to the SDRAM
Entering BOOT_image_get
Read FLASH start
Read address is - 2880008
Read FLASH OK
SW image validation passed
SW image is being executed
*****************************
