June 30, 2006 Appendix B: Redirection Server
SG1-UM-8500-03 B-5
Usage
event-level <NUM> output-device <Logging media>
Parameter(s)
<NUM>
It is the event level number. It is a number between 0-1000 Initial value 0.
<Logging media>
The media to use for logging, console: sys-Logger none, Initial value none
Example:
TFTP COMMANDS
Using copy-TFTP command
• The copy-TFTP command enables the upgrading of new RDS software.
• The new upgraded software is affecting after reloading the system.
• It is located at the “main” menu.
• It upgrades only standard RDS pack files.
• Download process reports the following errors:
a.Download timeout
b.File not found
c.Download hardware problem
d.Download pack file is corrupted
Usage
copy-TFTP flash <IP address> <File name>
Parameter(s):
<IP address>
This is the IP address of the TFTP server.
<File name>
This is the file name to download. Valid name: 1 to 255 alphanumeric characters.
RDSHost> configure terminal <cr>
RDSHost(config)# Event-level 1 output-device log-file
