Kawasaki KLX 250/300 Dual Sport Kit
Installation Manual
1. Get a degree in Mechanical and Electrical Engineering. (Just kidding!)
2. Remove the seat, side panels, radiator shrouds, and gas tank.
3. Unplug the taillight from the stock wiring harness, remove the three bolts which secure it
from the underside of the fender and remove the taillight. Use the hardware (6x25mm flange
head bolts) provided to re-attach the fender to the subframe leaving the wire support in place.
If you are color blind or even think you might be a little color blind, now is the time to get
someone to assist you. Successful installation of the kit requires good color recognition. You
want to go riding this weekend, don't you?
4. Unplug and remove the head light on/off switch from the wiring harness. Detach the
headlight from its wiring at the bulb socket. The headlight wiring unplugs underneath the tank
area. Unplug the red and yellow leads of this wiring, remove the ground attachment from the
ignition coil and remove this wiring.
manuals/kawasaki/klx300nw.doc
3
