C3OptionsAppendix C
Options
Attaching the Handset to Your FAX
Follow this procedure to attach the handset to your FAX:
1 Use a screwdriver to remove the two
covers on the left side of the unit.
2 Remove the screws from the plugs and
insert the plugs into the holes on the
handset cradle.
3 Insert the plugs (with the handset
cradle) into the holes on the unit.
• If you have difficulty inserting the
plugs, turn the unit so that the left
side is facing you and the right side
is against a wall. You can now
insert the plugs without the unit
moving.
4 Use your finger to push the screws
into the plugs.
• If you have difficulty, use a cross
point screwdriver to push the
screws all the way into the plugs.
(Do not screw them in as the
screws may break.)
• Make sure you support the unit
when inserting the screws.
5 Place the handset in its cradle and
connect the handset cord to the jack.
