A SERVICE OF

logo

36
How to deploy the Dell M8024 family of switches in a Cisco Nexus network
Figure 47: Initial configuration and assigning ports to port channels on the first
Cisco Nexus 5010 switch.
3. Type the following commands into the first Cisco Nexus 5010
switch (see Figure 48):
interface port-channel 1
switchport mode trunk
switchport trunk allowed vlan 1,101
vpc peer-link
spanning-tree port type network
exit
interface port-channel 10
switchport mode trunk
switchport trunk allowed vlan 101
vpc 10
exit
interface port-channel 11
switchport mode trunk
switchport trunk allowed vlan 101
vpc 11
end