A SERVICE OF

logo

Installing the Coin-Cell Battery
1. Insert the coin-cell battery to its place on the computer.
2. Connect the coin-cell battery cable to its connector on the system board.
3. Install:
a. base cover
b. battery
4. Follow the procedures in After Working Inside Your computer.
Removing the mSATA SSD
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
3. Perform the following steps as shown in the illustration:
a. Remove the screw that secures the mSATA SSD card to the computer [1].
b. Lift and remove the mSATA SSD card from the computer [2].
15