DXS/DWS 3200 Series User Guide
Page 316
– TRAP — Indicates that an SNMP trap is generated, and sent via the Trap mechanism. The Trap can also
be saved using the Trap mechanism.
– Both— Indicates that both the Log and Trap mechanism are used to report alarms.
• Falling Threshold — Displays the falling counter value that triggers the falling threshold alarm. The falling
threshold is graphically presented on top of the graph bars. Each monitored variable is designated a color.
• Falling Event — Displays the mechanism in which the alarms are reported.
• Startup Alarm — Displays the trigger that activates the alarm generation. Rising is defined by crossing the
threshold from a low-value threshold to a higher-value threshold.
• Interval — Defines the alarm interval time in seconds.
• Owner — Displays the device or user that defined the alarm.
• Remove — Removes the RMON Alarms Table entry.
2. Click . The Add Alarms Entry Page opens:
Figure 208:Add Alarms Entry Page
3. Define the Interface, Counter Name, Sample Type, Rising Threshold, Rising Event, Falling Threshold, Falling
Event, Startup Alarm, Interval, and Owner fields.
4. Click . The RMON alarm is added, and the device is updated.
