Configuring Device Security
Configuring Management Security
Page 93
The TACACS+ Page also contains the following fields:
• Host IP Address — Defines the TACACS+ Server IP address.
• Priority — Defines the order in which the TACACS+ servers are used. The field range is 0-65535. The
default is 0.
• Source IP Address — Defines the device source IP address used for the TACACS+ session between the
device and the TACACS+ server.
• Authentication Port (0-65535) — Defines the port number via which the TACACS+ session occurs. The
default port is port 49.
• Timeout for Reply— Defines the amount of time in seconds that passes before the connection between the
device and the TACACS+ times out. The field range is 1-1000 seconds.
• Single Connection — Maintains a single open connection between the device and the TACACS+ server.
The possible field values are:
– Checked — Enables a single connection.
– Unchecked — Disables a single connection.
• Status — Indicates the connection status between the device and the TACACS+ server. The possible field
values are:
– Connected — Indicates there is currently a connection between the device and the TACACS+ server.
– Not Connected — Indicates there is not currently a connection between the device and the TACACS+
server.
• Remove — Removes TACACS+ server. The possible field values are:
– Checked — Removes the selected TACACS+ server.
– Unchecked — Maintains the TACACS+ servers.
2. Click . The TACACS+ Page opens.
Figure 46: Add TACACS+ Host Page
3. Define the Host IP Address, Priority, Source IP Address, Key String, Authentication Port, Timeout for Reply,
and Single Connection.
4. Click . The TACACS+ server is defined, and the device is updated.
