cleaning the pyrolytic oven door (EPEE63CS & EPEE63CK models only) electrolux e:line ovens 2928 pyrolytic cleaning of the oven cavity (EPEE63CS & EPEE63CK models only) electrolux e:line ovens
Operation
by burning off the spatters and accumulated dirt and
grease from the oven liner, at high temperature. This
process produces ash which can then be wiped out
of the oven cavity.
During the pyrolytic cleaning process the oven becomes
door must be kept clear of any obstruction (eg bulky
tea towels).
keep the oven in its best condition.
(eg cookware).
BeforecarryingoutthePyrofunction,
This includes shelves, trays and side racks.
Clean large pieces of dirt or grease from the oven liner.
Note:
Thereare3Pyrocleaningcyclesyoucanuse.
Soiling Duration
Light Clean 2hrs 00min
Medium clean 2hrs 30min
Heavy clean 3hrs 00min
• Lightclean
This is an energy saving cycle that can be used on a
regular basis if your oven is lightly soiled. Possibly after
every 2nd or 3rd time you roast meat.
• Mediumclean
Use this as your regular cycle about once every
• Heavyclean
to clean it thoroughly. This cycle will clean the dirtiest
of ovens.
caution
Selecting the Pyro clean function
Select Pyro clean by using the function button.
PYRO CLEAN
pyro accept
Selectingtherequiredcleaningcycle
Select Light, Medium or Heavy depending on the soiling of
the oven. This is done by pushing the cook time button to
the appropriate time.
PYRO CLEAN
Medium clean
2
pyro accept
Selecting Pyro accept
accept button and the function will then start automatically.
The oven light will then go out and the Pyro function
will start.
PYRO CLEAN
Medium clean
2
pyro accept
tips and information
During Pyro cleaning the door will automatically lock when
symbol will appear on the display.)
The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door. This will only happen when safe temperatures
are reached.
Note:
AfterPyrocleaning
with a soft damp cloth and warm water.
use a damp cloth with vinegar and detergent.
Pyrolytic cleaning of the oven cavity
(EPEE63CS & EPEE63CK models only)
Your pyrolytic oven is equipped with an oven door that can
be disassembled in order to clean all the panes of glass.
Positioning the door for dismantling
The door needs to be positioned at an angle to aid in the
disassembly of the panes.
tab to the open position.
the oven door until it stops on the locating tab. The door
is now ready for dismantling.
Removingthetopdoortrim
Removingtheglasspanes
supports are removed before cleaning.
Donotmisplacethem!
Cleaning the glass panes
Clean with a damp cloth.
Do not use scouring agents or abrasive sponges as these
Dry thoroughly before reassembly.
Replacingtheglasspanes
pane 3.
the 2 rubber supports are in place.
this pane. This coating is indicated by a circle printed on
its surface. Ensure this circle is in the same corner as
pictured below.
Circle in this corner
inwards towards the oven.
Replacingthetopdoortrim
Replace the trim ensuring the clips snap into the 2 location
holes. Flip the hinge locating tab back into its original
position and close the door.
cause overheating and damage to both appliances.
Cleaning the pyrolytic oven door
(EPEE63CS & EPEE63CK models only)
