!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 1. Video resolution
2. White balance
3. Setup (enter setup menu)
4. Enter Playback mode
5. Shutter button
6. Photo mode
7. Video mode
8. Wi-Fi signal icon
9. Battery icon
!!!!!!!!!!!!!!!!!
3. iOS APP
3.1 Install SYMAGIX APP on your iPhone® or iPad®. When the installation
completes, the LCD will display icon.
3.2 Insert the SD card and turn on the camera, then press the Wi-Fi button to
enable it. You will see the Wi-Fi icon on the LCD.
3.3 Enable the Wi-Fi on iPhone or iPad and search for wireless AP signal
SY5000_WIFI, then connect it to camera, until the system displays
“Connected successfully”.
3.4 Click the icon in the App list of your iPhone or iPad to open it. Now
you can preview the image sent by the DV on the phone or tablet and start
operating. The interface is shown in the following figure.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1. DV battery icon
2. Video resolution
3. White balance
4. Setup (enter setup menu)
5. Enter Playback mode
6. Shutter button
7. Photo mode
8. Video mode
Note:
