displayed in LCD will flash. At the same time the red indicator will flash too,
meaning the recording is in process.
Stop recording: Press and release the button, the icon and [:]
displayed in LCD will stop flashing. At the same time the red indicator will
stop flashing, meaning the recording is stopped.
When the SD card is full, or the battery runs out, the recording will stop
automatically, and the recorded video will be saved before the DV turns off.
2. Photo
To take a photo, please check whether the DV is under Camera mode. If the
icon is not displayed on the screen, press the button repeatedly until it
appears.
Press and release the button, a beep will be heard and the red indicator
will flash, meaning a photo is taken. (If you take photos more than 999 copies,
the LCD screen display only 999)
3. Enable/disable Wi-Fi
The Wi-Fi is disabled by default. Press the Wi-Fi button on the side of the DV
to enable it. When you start connecting to Wi-Fi network, the indicator will
flash, and when a Wi-Fi network is connected, the indicator will remain on,
and the Wi-Fi icon will displayed on the LCD screen. (In order to save power,
Wi-Fi will be automatically disabled if no terminal is connected after 30
seconds)
