List of Functions
33
Settings Menu
Sub Menu Function
Keystone You can correct vertical keystone distortion in images. sQuick Start Guide
Operation Lock You can use this to restrict operation of the projector's control panel. s p.27
Pointer Shape You can select the shape of the pointer. s p.18
Pointer 1: Pointer 2: Pointer 3:
Brightness Control You can set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is
selected, the amount of electricity consumed is changed as follows, and fan rotation noise during projection is reduced.
Electrical consumption: about a 18% decrease
Vo lume You can adjust the volume.
RCA Audio Input
(EMP-6110 only)
You can select whether to use the RCA audio port (L-Audio-R) as audio input for either the
equipment connected to the Video port or the equipment connected to the S-Video port.
For example, the illustration on the right shows how the image port and the audio port are
combined when "S-Video" is selected.
Remote Receiver You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to
deactivate the remote receiver you do not want used or that is experiencing interference.
When you select "S-Video"
