Name Function
G
USB(TypeB) port
Connects the projector to a computer via the USB cable,
and the image on the computer is projected.s p.115
Also use this port to connect to a computer via the USB
cable to use the wireless mouse function.s p.40
H
Computer Input Port
For video signals from a computer and component
video signals from other video sources.s Quick Start
Guide
I
RS-232C Port
When controlling the projector from a computer,
connect it to the computer with an RS-232C cable. This
port is for control use and should not normally be used.
s p.122
Base
Name Function
A
Ceiling mount fixing
points
(3 points)
Attach the optional Ceiling mount here when
suspending the projector from a ceiling.s p.95,
p.104
B
Rear foot
When setup on a desk, turn to extend and retract to
adjust the horizontal tilt.s Quick Start Guide
C
Security cable
installation point
Pass a commercially available wire lock through here
and lock it in place. s p.50
Part Names and Functions
15
