Settings and Useful Functions
25
•
••
•
The "About" menu shows the setting details for the current image source.
•
••
•
The "Lamp" item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour.
Rear Proj. Use when projecting images from behind a translucent screen.
When set to "ON", the projected images are horizontally reversed.
OFF
Ceiling Use when installing the projector to a ceiling. When set to "ON", the projected
images are horizontally and vertically reversed.
OFF
Reset Resets all adjustment values for the "Advanced" menu functions except for the
"Language" setting to their default settings.
•
••
•
Press the [Enter] button to display the confirmation screen, and select "Yes".
•
••
•
Select "Reset All" to return all menu settings including settings for the
"Video" and "Audio" menus to their default settings. (p.26)
-
"About" Menu
Sub-menu Function Default
Lamp Displays the cumulative lamp operating time.
•
••
•
When the lamp warning period is reached, the display characters appear in
red.
0H
Reset Lamp
Timer
Initialises the lamp operating time. When this command is selected, the
cumulative lamp operating time is reset to the initial default value.
-
Video Source Displays the input source which is currently being projected.
Video Signal Shows the video signal format.
(Does not appear when the input source is component video, RGB video or
computer.)
-
Input Signal Displays the input signal settings.
(Does not appear when the input source is composite video or S-Video.)
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite video or S-Video.)
-
SYNC
Polarity
Displays the sync polarity.
(Does not appear when the input source is composite video or S-Video.)
-
SYNC Mode Displays the sync attributes.
(Does not appear when the input source is composite video or S-Video.)
-
Resolution Displays the input resolution.
(Does not appear when the input source is composite video or S-Video.)
-
Refresh Rate
Displays the refresh rate.
(Does not appear when the input source is composite video or S-Video.)
-
Sub-menu Function Default
Video (S-Video, Composite video)
Video
Auto (----)
: Select : Enter
Video
Audio
Setting
Advanced
About
Reset All
Video Source
Reset Lamp Timer
Lamp
0H
Video Signal
:
:
:
Execute
: Select : Enter
Video
Audio
Setting
Advanced
About
Reset All
Frequency
Video Source
V ---.--Hz
Reset Lamp Timer
H ---.--kHz
Lamp 0H
SYNC Mode
SYNC Polarity
------
V ------
H ------
Resolution
Refresh Rate ---.--Hz
--- x---
Computer
Input Signal
:
:
:
:
:
:
:
: RGB
Execute
Computer/RGB video/Component video
(Analogue-RGB, YCbCr
, YPbPr )
"Video" Menu "Setting" Menu "About" Menu Using the Configuration Menus
"Audio" Menu
"Advanced" Menu "Reset All" Menu
