A SERVICE OF

logo

8
Assembling the Printer
3
Assembling the Printer
Before assembling the printer, make sure that all protective
materials packed around and inside your printer are removed.
Follow the instructions in the
Unpacking Guide
to remove these
materials.
Note:
Keep all packing materials as you will need them when transporting the
printer.
Installing the Face-Up Tray
Follow these steps to install the face-up tray onto the left side of
the printer:
1. Locate the output slot on the left side of the printer.
2. Insert the right mounting pin of the face-up tray into the hole
on the right side of the output slot.