A SERVICE OF

logo

Testing and Connecting the Printer
49
2. Make sure that the printer is turned off. It is off when the
N
side of the power switch on the left side of the printer is
pushed in.
3. Connect the power cord to the AC inlet on the left side of the
printer.
4. Plug the power cord into a properly grounded electrical
outlet.
Testing the Printer
To test whether the printer is set up correctly, print a status sheet.
The status sheet contains information about the printer, including
the current settings. To print a status sheet, follow the procedures
below. You will have to first load the MP (Multi-Purpose) tray
with paper.
Loading paper
Follow these steps to load paper into the MP tray: