4
59
4l
Preparing the Projector to
Present Through a Network
This chapter tells you how to prepare your projector so that you can
send pictures to it through a network (G5150NL and G5350NL
only). Using EMP NS Connection, you can project images shown on
your computer screen—including text, graphics, and video—directly
to your audience. If you have Windows Vista, you can also use the
Network Projector feature to communicate with your
network-connected projector without installing any software.
You’ll find instructions and information in this chapter on:
■ Configuring basic settings
■ Connecting wirelessly to the projector in Ad Hoc
(computer-to-computer) mode or Access Point (infrastructure)
mode
■ Using wireless security options
■ Projecting Over a Network
■ Using Windows Vista to connect to the projector
Before starting, make sure you’ve installed the optional wireless
network module if you plan to project wirelessly (G5150NL or
G5350NL only). You must also install the EMP NS Connection
software as described in the EasyMP Operation Guide for each
computer you connect to the projector. Then follow the steps in this
chapter to configure your projector and computer.
