Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
3 2
TM-T81
Specification
(STANDARD)
A
1.2 Character Specifications
1) Number of characters: Alphanumeric characters: 95
Extended graphics: 128 × 11 pages
(including one space page)
International characters: 48
2) Character structure: Font A: 12 × 24 (including 2-dot spacing in horizontal)
Font B: 9 × 17 (including 2-dot spacing in horizontal)
NOTE: Font A is selected as the default
3) Character size: See Table 1.2.1.
Table 1.2.1 Character Size
Standard Double-height Double-width
Double-width/
Double-height
W×H (mm)
cpl
W×H (mm)
cpl
W×H (mm)
cpl
W×H (mm)
cpl
Font A 12×24 1.41×3.39
42
1.41×6.77
42
2.82×3.39
21
2.82×6.77
21
Font B 9×17 0.99×2.40
56
0.99×4.80
56
1.98×2.40
28
1.98×4.80
28
Space between characters is not included.
Characters can be scaled up to 64 times as large as the standard sizes.
cpl = characters per line
4) Supporting character on each model type: See Table 1.2.2.
1.3 Autocutter
1) Cutting method: Scissors type with separated blades
2) Cutting type: Partial cut (cutting with one point in left edge left uncut)
NOTES: 1. To prevent dot displacement, after cutting, feed paper approximately 1 mm {14/360"} or
more before printing.
2. Paper must be fed over 40 mm {1.57"} before cutting if the printer is stopped. This
prevents a possible paper jam.
