A SERVICE OF

logo

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 575
GS ( E pL pH fn d1 d2 d3 <Function 2>
[Name] End the user setting mode session
[Format] ASCII GS ( E
pL pH fn d1 d2 d3
Hex 1D 28 45
04 00 02 4F 55 54
Decimal 294069
40 2 798584
[Range] (
pL
+
pH
× 256) = 4 (
pL
= 4,
pH
= 0)
fn
= 2
d1
= 79
d2
= 85
d3
= 84
[Description] Ends the user setting mode, and performs a software reset.
[Notes]
This function is performed when the printer is in user setting mode.
After the software reset, the printer goes into the power on state.
Executing this function enables setting values set in user setting mode (such as memory switch or
customize value).
Be sure to execute this function after changing all the setting values.