A SERVICE OF

logo

1-11
Monitor
J582
J581
Control Head Cable
Clamp
Remove clamp
from left side
Remove clamp from rear side
Figure 1-14 Clamp position
11.Unfasten four upset screws (6) at the bottom of the right and left KB arms to
dismount the control head.
12.Unfasten three screws (M4X10) and two screws (M4X8) to remove the right
lower cover (7) and the left lower cover (8).
Right Lower Cover (7)
Pan-head Screw (M4X10, 3 pcs., upper)
Binding Screw (M4X8, 2 pcs., lower)
Pan-head Screw (M4X10, 3 pcs., upper)
Binding Screw (M4X8, 2 pcs., lower)
Left Lower Cover (8)
Right KB Arm
Upset Screw (6)
(M5X25, 4 pcs.,
including those on
opposite side)
Control Head
Figure 1-15 Display unit, front view