A SERVICE OF

logo

2-3
12.If the antenna unit is mounted 2° or more left of ship’s bow, adjust the position
of S901 so it becomes “on” (contact between #1 and #2 on pcb MP-3795). To
access S901, open the bow side cover; S901 is above the drive gear.
15 16171819 20 212223 242526 2728
1234567891011121314
RTB801
Bow mark
S901
Figure 2-4 Antenna unit, front view
13.Confirm that all screws are tightened and all wiring is properly made. Coat
waterproofing gasket, bolts and tapping holes of antenna unit with silicone
grease. Check that the waterproofing gasket is seated as shown in Figure 2-5.
Close the antenna unit cover.
Coat gasket with silicone grease.
DO NOT use silicone sealant.
CORRECT
WRONG
Figure 2-5 Correct seating of waterproofing gasket