A SERVICE OF

logo

2-1
WIRING
2.1 Antenna Unit
CAUTION
Transceiver module
(magnetron inside)
Height more
than 5 cm
Non-ferrous
block
The magnetron in the transceiver module will de-
magnetize if it contacts ferrous material. When
dismounting the transceiver module, lay it on its
side or on top of non-ferrous material as shown
below.
1. Open the antenna unit cover.
2. Disconnect plugs P611, P801 and P821.
3. Unfasten the transceiver module (two bolts). Remove the transceiver module.
J611
J801
J821
Fixing
bolts
Figure 2-1 Antenna unit, front view