6
Que Applications
QueGPS
QueGPS Options Menu
QueGPS Preferences
To use QueGPS Options:
1. With the QueGPS page open, tap the QueGPS application tab or
the Menu icon to display the Options Menu.
2. Observe the list of options:
• Select
Preferences to display the GPS preference options.
• Select
New Location when initializing the GPS Receiver if you
have moved over 600 miles from your last use location or if
you have not powered up the unit in over thirty (30) days.
• When in 2D mode, select
New Elevation to reset the
elevation.
To use QueGPS Preferences:
1. Tap the Preferences option to display the GPS Preferences Menu.
2. Observe the list of options with check boxes:
• Tap
WAAS Enabled to enable the Wide Area Augmentation
System operating mode. (See “Additional Information about
WAAS” in the Appendix of this guide.)
• Tap
Battery Saver to change the rate at which the GPS
receiver updates your position data to conserve battery power.
The GPS receiver slows the frequency at which it calculates
your location and therefore requires less battery power. There
is a slight loss in position accuracy when Battery Saver is on.
You cannot operate in the WAAS and Battery Saver modes at
the same time. If you attempt to check both boxes, a message
displays and the last option checked remains on after you tap
the message’s
OK button.
