Configuration Menu 206
Link to Disable configuration
Command: /cfg/ufd/fdp/ltd
[Failure Link to Disable Menu]
addport - Add port to Link to Disable
remport - Remove port from Link to Disable
addtrnk - Add trunk to Link to Disable
remtrnk - Remove trunk from Link to Disable
addkey - Add adminkey to Link to Disable
remkey - Remove adminkey from Link to Disable
cur - Display current LtD configuration
The following table describes the Link to Disable (LtD) Menu options. The LtD can consist of any mix of
downlink ports (ports 1-16) and trunk groups that contain only downlink ports.
Table 191
Link to Disable Menu options
Command Description
addport <port number>
Adds a port to the current LtD group. Only downlink ports (1-16) are
allowed in the LtD.
remport <port number>
Removes a port from the current LtD group.
addtrunk <1-12>
Adds a trunk group to the current LtD group. LtD trunk groups can contain
only downlink ports (1-16).
remtrunk <1-12>
Removes a trunk group from the current LtD group.
addkey <1-65535>
Adds a LACP admin key to the LtD. LACP trunks formed with this admin
key will be included in the LtD.
remkey <1-65535>
Removes a LACP admin key from the LtD.
cur
Displays the current LtD configuration.
