94 Chapter 4
CDMA Measurements - Screens and Control Fields
Analyzer (CDMA analyzer) Analyzer (code domain analyzer)
Analyzer (CDMA analyzer)
The Analyzer field controls three functions:
• Arm Meas arms the CDMA analyzer. The CDMA analyzer needs to
be armed only when Single
(see below) is selected.
• Single/Cont selects between “single” measurements and
“continuous” measurements.
• When Single is chosen, you must arm each measurement by
selecting the Arm Meas field (see above).
• When Cont
(continuous) is chosen, measurements are
automatically armed.
The default selection is Cont
.
• Disarm disarms the CDMA analyzer during single operation. To
stop continuous measurements, select Single
. Selecting Disarm
does not prevent the analyzer from being re-armed during
continuous measurements
Screens on which this field is present
CDMA ANALYZER
Analyzer (code domain analyzer)
This field is used to arm or disarm measurements when making a
single measurement (does not affect continuous measurements).
Selecting Disarm stops the analyzer during a single measurement.
See the "Measurement" field on page 104 for more information.
Screens on which this field is present
COD DOM (Code Domain Analyzer): main controls menu
