HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide A-3
Product Specifications
A
Power Supply Specifications
The power supplies are universal and capable of functioning worldwide without using voltage
jumpers or switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in
terms of accommodating input voltages and line frequencies. Each power supply has its own built-
in fan for cooling, pushing the air towards the front of the switch.
.
Environmental Requirements
The following table lists the environmental ranges that are acceptable when the FC 16B is
operating, and the ranges that are acceptable when the switch is not operating.
Table A-2 Power Supply Specifications
Specification Value
Outlet Correctly wired and earth-grounded
Total power available
from each power supply
126 Watts, with fans operating
Max. switch power 90 - 102 Watts (depending on SFP media vendor)
Input voltage 100 - 240 VAC
Input line frequency 47 - 63 Hz
Harmonic distortion Active power factor correction per IEC1000-3-2
BTU rating 108 Watts x 3.412 BTU/Hr/Watts = 368.5 BTU/hr
Inrush current 10 Amps Peak, > 300 usec - hot/cold start
Input line protection Fused in both hot & neutral lines
Maximum dimensions 3.5” wide, 1.5” high, 13.5” long
Table A-3 Environmental Requirements
Condition Acceptable Range
Temperature (operating)
10°C to 40 °C
Temperature (non-operating) -35°C to 65 °C
Humidity (operating) 5% to 85% RH non condensing, at 40°C
Humidity (non-operating) 0% to 90% RH non-conducting, at 40°C
Altitude
(operating) 0 to 3 kilometers above sea level
Altitude
(non-operating) 0 to 12 kilometers above sea level
