Configuration Menu 152
ACL Packet Format configuration
Command: /cfg/acl/acl <1-762>/pktfmt
[Filtering Packet Format Menu]
ethfmt - Set to filter on ethernet format
tagfmt - Set to filter on ethernet tagging format
reset - Reset all fields
cur - Display current parameters
The following table describes the Packet Format Configuration Menu options.
Table 169 Packet Format Configuration Menu options
Command Description
ethfmt eth2|snap|llc
Defines the Ethernet format for the ACL.
tagfmt none|tagged
Defines the tagging format for the ACL.
reset
Resets Packet Format parameters for the ACL to their default values.
cur Displays the current Packet Format parameters for the ACL.
ACL Group configuration
Command: /cfg/acl/group <1-762>
[ACL Group 1 Menu]
add - Add ACL to group
rem - Remove ACL from group
cur - Display current ACL items in group
This menu allows you to compile one or more ACLs into an ACL Group. Once you create an ACL Group, you can
assign the ACL Group to one or more ports.
The following table describes the ACL Group Configuration Menu options.
Table 170 ACL Group Configuration Menu options
Command Description
add acl <1-762>
Adds the selected ACL to the ACL Group.
rem acl<1-762>
Removes the selected ACL from the ACL Group.
cur Displays the current ACL group parameters.
Remote Monitoring configuration
Command: /cfg/rmon
[RMON Menu]
hist - RMON History Menu
event - RMON Event Menu
alarm - RMON Alarm Menu
cur - Display current RMON configuration
Remote Monitoring (RMON) allows you to monitor traffic flowing through the switch. The RMON MIB is described in
RFC 1757.
