CLI commands
PPTP client interface context
Path: View > Enable > Config > PPTP client interface
This is the PPTP client context.
active
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
active
Sets PPTP client connection to ’up’.
no active
Sets PPTP client connection to ’down’.
pptp client credentials
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
pptp client credentials <name> <password>
Sets the PPTP username and password.
pptp client domain name
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
pptp client domain name <name>
Sets the domain name used by the PPTP client.
pptp client server address
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
pptp client server address <address>
Sets the IP address to connect to.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
ip nat
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip nat
Enables NAT for the PPTP client.
no ip nat
Disables NAT for the PPTP client.
2-118
