Starting Out with Your OmniBook
Setting Up the OmniBook
1-9
To use the mouse
The mouse is extremely sturdy. Its flexibility allows it to withstand bending and
accidental bumps without breaking.
1. Eject the mouse.
• Press the round mouse-eject button in the upper-right corner of the
keyboard.
• Firmly pull the mouse out past the first resistance to its full extended
position—about 3 inches (8 centimeters).
• Lift the near end of the mouse—it pops up for a more comfortable shape.
Although the arm limits the physical extension of the mouse, it does not
limit the travel of the pointer, as you will see. Just by pushing or pulling on
the pointer, the pointer will continue to travel.
2. Calibrate the mouse.
When you turn on the OmniBook, you might notice that the mouse needs to re-
calibrate itself—that is, it needs to redefine its margins.
• Simply push or pull the mouse against one vertical limit—and then one
horizontal limit—until the pointer on the screen travels to the edge of the
screen.
3. When done, store the mouse.
• If the mouse is popped up, press inward on the support arm and press the
raised end of the mouse downward to collapse it.
• Gently push the mouse into the case opening until it latches.
