Expanding the OmniBook
Replacing Internal Hardware
3-9
1. Exit Windows; otherwise, your current session and any unsaved data will not be
preserved.
Important: Turn off the unit, unplug the ac adapter, and remove the
battery.
2. Turn the OmniBook over. Press your thumbs against the ridges on the memory-
slot cover and push the cover off of the memory-expansion slot.
3. If a memory-expansion board is already present, pull out the original board by
its plastic edge.
4. Drop the new memory-expansion board in at an angle to fit under the edge of
the opening. Align the four little posts on the plastic ridge with the four small
holes in the front edge of the expansion slot. Press the board by its ridge until it
is completely seated.
5. Reinstall the slot cover, insert the battery, and reset the computer.
6. If you are running Windows for Workgroups, you must update the Cache Size
and restart the computer before using the new memory board.
In Control Panel (in the Main group in Program Manager), choose the
Enhanced icon, then choose Virtual Memory and Change. First clear the Use 32-
Bit File Access option, if necessary, then select this option again. This updates
the Cache Size setting. Choose OK to save the new setting. When prompted,
choose Restart Windows to activate the new setting.
Memory-
