
16
ADVANCED OPERATIONS
dTmF (duAl Tone mulTi Frequency) cAllS
■ Making a DTMF Call
Note: DTMF calls can be made only in analog operation.
Manual Dialing (Microphone Keypad Only)
1 Press and hold the microphone PTT switch.
2 Enter the desired digits using the microphone keypad.
• If you release the microphone PTT switch, transmit mode will end even if the
complete number has not been sent.
• If the Keypad Auto PTT function has been enabled by your dealer, you do not
need to press the PTT switch to transmit; you can make the call simply by
pressing the microphone keys.
Store & Send
1 Enter up to 30 digits using the microphone keypad.
• Alternatively, you can enter digits by using / {page 11}.
2 Press the microphone PTT switch to make the call.
■ Autodial
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the key programmed as Autodial, or access the Menu {page 9}.
2 Press / to select your desired number, or enter the list number directly
(01 ~ 32).
• The stored entry appears on the display.
3 Press the microphone PTT switch to make the call.
■ Stun Code
This function is used when a transceiver is stolen or lost. When the
transceiver receives a call containing a stun code, the transceiver becomes
disabled. The stun code is cancelled when the transceiver receives a call with
a revive code.
encrypTion
Note: You must install the Secure Cryptographic Module (SCM) to use the Encryption feature.
Press the key programmed as Encryption, or access the Menu {page 9}, to
switch the transceiver to secure (encrypted) transmission.
• Pressing the microphone PTT switch after the Encryption function has been turned ON
encrypts the transmitted signal.