A SERVICE OF

logo

Open as PDF
next previous
Optional Equipment 41
Travis Industries 93508131 4020327
Surround Panels (see part #'s below)
Rectangular Panels:
Surround Panel Size Size on Appliance (Including Trim) PART #
8" 40 1/8" width by 28 1/4" height 99300106
10" 44 1/8" width by 30 1/4" height 99300107
Arched Panels (Part # 99300108)
40-1/4”
31-3/4”
24”
Radius = 40-3/4”
28-3/4”
23-1/2”
26-3/4”
25-1/4”
INSTALLATION INSTRUCTIONS
1. With the insert 12” from the fireplace, install the side surround panels (see the directions
below).
Attach the side
surround panels
with the included
screws.
b
a
5/16" Nutdriver
Pry the button plugs
from both sides of the
insert. Pre-thread the
holes on the insert with
the screws included in
the surround panel kit
(both sides).
Standard
Screwdriver
2. Adjust the position of the side panels so they are: 1) aligned with the top of the insert; 2)
both the same distance back from the front of the insert; 3) perpendicular to the floor (use
the top panel, if necessary, to judge alignment). Tighten the screws that hold the side
panels in place.