Wavelink Avalanche Enabler Configuration 117
E-EQ-VX3XRG-G VX3X Reference Guide
File Menu Options
Connect
The Connect option under the File menu allows the user to initiate a
manual connection to the Mobile Device Server. The connection methods,
by default, are wireless and COM connections. Any updates available will
be applied to the mobile device immediately upon a successful connection
Abort Stop transmission.
Settings The Settings option under the File menu allows the user to access the
control panel to locally configure the Enabler settings. The Enabler control
panel is, by default, password protected. The default password is system.
The password is not case-sensitive.
Scan Config Note: LXE does not support the Scan Configuration feature on Windows
CE devices.
The Scan Config option under the File menu allows the user to configure
Enabler settings using a special barcode that can be created using the
Avalanche Mobility Center Console utilities. Refer to the Wavelink
Avalanche Mobility Center User’s Guide for details.
Exit The Exit option is password protected. The default password is leave. The
password is not case-sensitive.
If changes were made on the Startup/Shutdown tab screen, then after
entering the password, tap OK and the following screen is displayed:
Change the option if desired. Tap the X button to cancel Exit. Tap the OK
button to exit the Avalanche applet.
