A SERVICE OF

logo

1. Before Starting Measurements
No. 99MBA038A
1-5
1.2 Preparing for Measurement
[Purpose of Practice]
To learn the operating procedures from turning on the power to getting the state where
measurement commands can be executed.
[Operating Procedure]
1) Turn on the power for the data processing unit.
2) Set the printer output to ON.
1.2.1 Turning On the Power
Table 1-2-1
No. Operation Screen display and remarks
1 Turn the power switch to ON.
2
The Startup Screen is displayed.
A little bit after the opening screen is
displayed, the startup screen shown at right is
displayed.
Press a measurement or menu key.
X 0.000 Y 0.000