34
8.3. Checking and erasing the operating time
In this menu point you can check and erase the recorded
operating time. To erase the value you must hold the handle
button
G
pressed in for longer than 3 sec; you will hear an
audible signal to confirm that the erasure has taken place.
§ Use the º button to search for the menu point OPTIME
The screen shows hours and minutes.
Press any menu button (except º) to return to the operating screen.
9. Model memories 11
The model memories store all the settings which you have entered for a particular
vehicle. The settings include:
v Modulation (FM/AM)
v Servo signal format, direction of rotation, centre, travels
v Settings for throttle, brake and steering
v Timer setting (ON or OFF) and signal setting
v Trims
If you switch off the transmitter, or switch to a different model memory, the data in
the active model memory is updated.
9.1. Switching to a different model memory
§ Use the 1 button to search for the menu point GO TO
§ Use the digi-adjustor to select the destination memory
The screen shows name, memory and trim settings.
§ Complete the change by holding the handle button
G
pressed in for longer than 3 sec.
A long audible tone confirms that the change has been made, and the operating
screen appears again.
9.2. Entering the model name
A model name can consist of up to six letters, numbers or other characters. The
following characters are available:
ABCDEFGHIJKLMNOPQRSTUVWXYZ-0123456789
§ Use the 1 button to search for
the menu point MODEL
§ The first character flashes, and can be changed using
the digi-adjustor.
§ Press the handle button
G
to shift to the next
character, and from the last character back to the first one
Press any menu button (except 1) to return to the operating screen.
03
GO TO
STAMP
MODEL
MIRAGE
OPTIME
6:17
