Replacing
Consumables
77
ATTENTION
Sheet Bypass Capacity
● Weight : 18-28 lb (Bond Paper), 90-121 lb (Inde
x Paper)
● Size : 12" x 18" to 5.5" x 8.5" (Invoice)
● Paper Capacity : 50 sheets (8.5" x 11"/20 lb)
● Suitable media : Plain Paper, Thin Paper, Glossy Paper, Recycled Paper, Thick Paper, Coated Paper,
Inde
x/Cover Paper, Coated/Cover Paper, Transparency, or Labels.
● For more details about media type, see page 98.
Press the Copy key if the machine is
set to other function mode.
4
If using other than Plain Paper, follow the steps
below to set for your desired type of printing media.
Select "Paper/Output Tray".
5
Select "Change Size/Media".
6
Select "Change Type".
7
Select a printing media type, and then
select "OK".
8
Select the best suited
media type (see
page 98) to match
the one loaded in
step 3 above.
Adjust the Side Guides.
3
● Incorrect adjustment may cause the
paper to wrinkle, misfeed, or skew.
●
If the paper size is not detected, remove
the paper and press the Reset key.
Then, load the paper again.
● Ensure to change the media type
selection in the control panel when
changing the media loaded on the
tr
ays. (Ex: Select "Transparency"
when Transparencies are loaded in the
Sheet Bypass)
Side Guides
●Preprinted form is represented by a " ".
●"Auto" can detect the standard sizes of paper
(11" x 17", Legal, 8.5" x 11", 5.5" x 8.5"). When
selecting "Auto", ensure that standard sizes
of paper are loaded in the trays before printing.
Select "OK".
