A SERVICE OF

logo

Replacing
Consumables
87
Continue on the next page...
Pull out the Stapler Unit.
3
Stapler Unit
Set the Staple Case (new).
6
Pull out the Staple Cartridge by pinching
the green buttons.
4
Remove the Tape.
7
Remove the Staple Case (Empty).
5
Insert the Staple Cartridge.
8
Push on each side of the Cartridge, and then
remove the cover.
Insert it all the way in until it locks.
Staple Cartridge
Staple Case
(Empty)
Press both
sides.
Staple Cartridge
Tape
Staple Case (new)
Slide the new staple case into the staple
cartridge, and then push the cover to close.