Caller ID
- 31 -
Storing caller information into one-touch dial and
navigator directory
Important:
L
This feature is not available in the following cases:
– The telephone number includes data other than numbers (i.e.
*
or #).
– The caller information does not include a telephone number.
1
Press
{
CALLER ID
}
.
Example: 2 NEW CALLS
PRESS NAVI.[+ -]
2
Press
{+}
or
{-}
until the desired entry is
displayed.
Example: SAM LEE
Apr. 14 11:50AM
3
Press
{
MENU
}
.
Example: SAM LEE
PRESS STATION OR
b
SAM LEE
PRESS NAVI.[
(
)
]
4
Select the desired key or entry.
For stations 1–3:
1. Press the desired station key.
Example: STATION 1
DIAL MODE [±]
2. Press
{
SET
}
.
Example: NAME=SAM LEE
STORE:PRESS SET
3. Press
{
SET
}
.
Example: <S01>=134567890
For stations 4–6:
1. Press the desired station key.
Example: NAME=SAM LEE
STORE:PRESS SET
2. Press
{
SET
}
.
Example: <S04>=134567890
For stations 7–12:
1. Press
{
LOWER
}
, then press the
desired station key.
Example: NAME=SAM LEE
STORE:PRESS SET
2. Press
{
SET
}
.
Example: <S09>=134567890
For navigator directory:
1. Press
{<}
or
{>}
.
Example: NAME=SAM LEE
STORE:PRESS SET
2. Press
{
SET
}
.
Example: NO.=134567890
5
Press
{
SET
}
.
REGISTERED
Note:
L
You can confirm the stored entries on the
telephone number list (page 84).
L
The unit can only store a name of up to 10
characters long.
L
To edit a name and number, see page 25.
L
If you enter a new entry into a station key, the
previous entry will be overwritten.
L
If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3.
Station keys
{LOWER}
{CALLER ID}
{SET}
{>}{-}{<}
{+} {MENU}
