Setup (PC)
- 54 -
Multi-Fun ction Stat ion software
Connecting to a computer
Panasonic Multi-Function Station software enables your fax machine to carry out the following functions:
– Printing on plain paper, transparencies, labels and envelopes
– Scanning documents and converting an image into text with Readiris OCR software
– Scanning from other Microsoft
®
Windows
®
applications that support TWAIN scanning
– Storing, editing or erasing entries in directories from your PC
– Programming the basic and advanced features from your PC
To run Multi-Function Station software, you need the following:
When using an IEEE1284 compliant parallel cable:
Parallel cable (amphenol 36 pin, less than 3 metres long) must be purchased separately.
When using a USB cable (Windows 95 does not offer USB support):
USB cable (less than 3 metres long) must be purchased separately.
After connecting the USB cable, you must set the cable type to “USB” (feature #15 on page 64).
Note:
L
If you want to replace the parallel cable with a USB cable and vice versa, see page 74.
– Compatible OS: Windows 95/98/Me/2000
– CPU: Windows 95/98: Pentium
®
90 MHz or higher processor
Windows Me: Pentium 150 MHz or higher processor
Windows 2000: Pentium 166 MHz or higher processor
– Memory minimum: Windows 95/98: 24 MB (32 MB or more is recommended.)
Windows Me: 32 MB (64 MB or more is recommended.)
Windows 2000: 64 MB
– Hard disk: More than 40 MB available space
– Other: Parallel (IEEE1284) port or USB port, and CD-ROM drive
