Sending Faxes
- 36 -
Sending a fax using one-touch dial and navigator
directory
Before using this feature, program the desired names and telephone numbers into one-touch dial and
navigator directory (page 23, 24).
1
Adjust the width of the document guides to
the size of the document.
2
Insert the document (up to 15 pages) FACE
DOWN into the feeder until the unit grasps
the document and a single beep is heard.
L
Confirm that there are no documents
on the scanner glass.
STANDARD
3
If necessary, press
{
RESOLUTION
}
repeatedly to select the desired setting
(page 32).
4
Enter the fax number.
Using stations 1–6:
Press the desired station key.
Using stations 7–12:
Press
{
LOWER
}
, then press the desired
station key.
Using navigator directory:
Press
{<}
or
{>}
, then press
{+}
or
{-}
to display the desired entry.
L
If the desired name has not been stored
in navigator directory, press
{
STOP
}
and dial the number manually.
5
Press
{
FAX START
}
.
L
The unit will start dialling and send the
document automatically.
Note:
L
Do not open the document cover when
sending a fax with the auto document feeder.
To send a fax using the scanner glass
L
Confirm that there are no documents in
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
3. Enter the fax number using one-touch dial or
navigator directory.
L
To send a single page, skip to step 7.
L
To send multiple pages, go to the next
step.
4. Press
{
SCAN
}
to scan the document into
memory.
5. Place the next page.
6. Press
{
SCAN
}
.
L
To send more pages, repeat steps 5 and
6.
7. Press
{
FAX START
}
.
FACE
DOWN
Document guides
Station keys
{LOWER}
{<}
{>}
{+}
{-}
{STOP}
{RESOLUTION}
{FAX START}{SCAN}
