OPTION SETTING
B
Color/black & white selection setting (DAY/NIGHT)
The ALARM IN terminal on the rear panel can be used to force
the image mode to color mode or black & white mode. Use this
setting when using this terminal to force the mode selection.
However, when this setting is being used, external alarm input
cannot be received.
1
Set DAY/NIGHT in the LENS setting screen to “COLOR”.
First change the DAY/NIGHT setting in the LENS setting screen
to “
COLOR
”. (See p23)
2
Color/black & white selection setting
Use the cursor button (
j
or
l
) to move the cursor to
ALM for ALARM IN, and then use the cursor button (
d
or
c
) to set the input (e.g. COLOR).
•
ALM:
The control terminal (ALARM IN) is used for alarm input.
•
COLOR:
The control terminal (ALARM IN) is used for
color/black & white selection input. External operations can
then be used to forcibly switch the mode to color mode or
black & white mode.
3
POLARITY setting
Use the cursor button (
j
or
l
) to move the cursor to
POLARITY, then use the cursor button (
d
or
c
) to select
“NO” or “NC”.
Available settings:
•
NO:
Normally open (Normally open, and mode switches
between color and black & white when closed)
•
NC:
Normally closed (Normally closed, and mode switches
between color and black & white when opened)
POLARITY setting
Between ALARM
IN - COM terminals
Mode after
selection
When set to NO
Open COLOR
Closed B/W
When set to NC
Open COLOR
Closed B/W
Note:
• If DAY/NIGHT has been set to “
COLOR
”, color/black &
white selection will not be possible.
• If COLOR is selected, settings relating to external alarm
input will not be displayed, and it will not be possible to
receive external alarm inputs.
• The color/black & white selection setting is applied from the
point after the menu is exited.
1
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT COLOR‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
2, 3
ALARM SETTING
ALARM IN ALM
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
PRESET OFF
MENU BACK
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
English
59
