CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and cables
are sold separately.
1
Make the video signal connection between the camera
and the monitor or time lapse VCR.
2
Power supply choices
• When using a commercially available 24 V AC adaptor,
make sure to use a cable with an earth line (22AWG or
more) to connect to the grounding terminal. (
Fig.1.
)
• When using a DC 12 V power supply, make the
connections as indicated in
Fig. 2
.
CAUTION:
To prevent camera and/or power supply failure, pay close
attention to polarity when making the connections.
3
Insert the plug of this power supply into a wall outlet.
The
POWER
indicator
(A)
will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
GND
AC24V
DC12V CLASS 2WIR
GND
AC24V
DC12V CLASS 2WIR
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
AC 24 V connection DC 12 V connection
Fig. 1 Fig. 2
Time lapse VCR or
Digital video recorder
(sold separately)
TV monitor
(sold separately)
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
English
6
