Page 3-1
SPIRE III Series – Installation and Operating Instructions
Model 44T 64T 64Ct
Operating Speed
Up to 20 fpm (6 mpm)
Maximum Temperature
300 °F (149 °C) 120 °F (49 °C)
Maximum Mounting
Thickness
Main Roller: 2 in. (50 mm) Max.
Pull Roller: 2 in. (50 mm) total working gap
Main Roller: 2 in. (50 mm)
Max.
Maximum Film Width
44 in. (111.8 cm) 64 in. (162.5 cm) 64 in. (162.5 cm)
Dimensions (unit only)
• Width
• Height
• Depth
61 in. (156.2 cm)
31.5 in. (80 cm)
55.9 in. (142 cm)
81.2 in. (206.2 cm)
31.5 in. (80 cm)
55.9 in. (142 cm)
81.2 in. (206.2 cm)
31.5 in. (80 cm)
55.9 in. (142 cm)
Weight
• Unit only
• Shipping
691 lb. (314 Kg).
880 lb. (400 Kg).
902 lb. (410 Kg)
1166 lb. (530 Kg)
803 lb. (365 Kg)
1067 lb. (485 Kg)
Electrical Requirements
(U.S. Models)
• Voltage
• Current
• U.S. Receptacle
208-240V 60 Hz single
phase
24 Amps
NEMA 6-30
Refer to the nomenclature
plate located on the rear
of the laminator for the
specic electrical rating
applicable to the unit.
208-240V 60 Hz single
phase
26 Amps
NEMA 6-50
Refer to the nomenclature
plate located on the rear
of the laminator for the
specic electrical rating
applicable to the unit.
115V 60 Hz single phase
12 Amps
NEMA 5-15
Refer to the serial plate
located on the rear of the
laminator for the specic
electrical rating applicable
to the unit.
3. specIFIcatIons
Figure 2. SPIRE Series dimensions.
Width
Depth
Height
