Appendix C Using the ILOM Service Processor GUI to View System Information 47
After you have selected a category of event, the Event Log table is updated with the
specified events. The fields in the Event Log are described in
TABLE C-1.
4. To clear the event log, click the Clear Event Log button.
A confirmation dialog box is displayed.
5. Click OK to clear all entries in the log.
6. If the problem with the server is not evident after viewing ILOM SP logs and
information, continue with “Running SunVTS Diagnostic Tests” on page 7.
Interpreting Event Log Time Stamps
The system event log time stamps are related to the service processor clock settings.
If the clock settings change, the change is reflected in the time stamps.
When the service processor reboots, the SP clock is set to Thu Jan 1 00:00:00 UTC
1970. The SP reboots as a result of the following:
■ A complete system unplug/replug power cycle
■ An IPMI command; for example, mc reset cold
■ A command-line interface (CLI) command; for example, reset /SP
TABLE C-1 Event Log Fields
Field Description
Event ID The number of the event, in sequence from number 1.
Time Stamp The day and time the event occurred. If the Network Time Protocol
(NTP) server is enabled to set the SP time, the SP clock will use
Universal Coordinated Time (UTC). For more information about
time stamps, see “Interpreting Event Log Time Stamps” on page 47.
Sensor Name The name of a component for which an event was recorded. The
sensor name abbreviations correspond to these components:
sys: System or chassis
• p0: Processor 0
• p1: Processor 1
• io: I/O board
• ps: Power supply
• fp: Front panel
• ft: Fan tray
• mb: Motherboard
Sensor Type The type of sensor for the specified event.
Description A description of the event.
