A SERVICE OF

logo

18 Sun Blade X6240 Server Module Installation Guide June 2008
Option 2: Connecting to ILOM Through a Dongle
Cable
You can use the dongle cable to connect a terminal directly to the server module
ILOM.
FIGURE 2-2 shows a dongle cable connected to a server module.
Caution The dongle cable should be used only for configuration and service
purposes. It should be disconnected from the server module when the configuration
or servicing operation is completed.
If you have a dongle cable connected to a server module, it must be removed before
closing the door of a rack cabinet. The dongle cable may be damaged if it is not
removed before the cabinet door is closed.
FIGURE 2-2 Dongle Cable
3
2
1